HOME / SPIN CASTING / MOULDING FRAMES
MOULDING FRAMES FOR VULCANIZATION
Moulding frames for the vulcanization of silicone and organic rubber. The “raw” rubber is positioned inside the moulding frame and then vulcanized inside the Nicem presses.
Each moulding frame is composed of: a steel ring, a wedge opening/closing system, a lower disc, an upper disc and its respective ring, a mushroom for extraction, spacer rings and an extractor.
AVAILABLE MODELS
HIGH SERIES Maximum silicone rubber thickness 60 mm | 2.36" | LOW SERIES Maximum silicone rubber thickness 30 mm | 1.18" | SPECIAL SERIES Min-max silicone rubber thickness 75-125 mm | 2.95-4.92” |
Ø 230 mm | 9.1" | Ø 230 mm | 9.1" | Ø 300 mm | 11.8" |
Ø 250 mm | 9.8" | Ø 250 mm | 9.8" | Ø 350 mm | 13.8" |
Ø 300 mm | 11.8" | Ø 300 mm | 11.8" | Ø 400 mm | 15.7" |
Ø 350 mm | 13.8" | Ø 350 mm | 13.8" | Ø 457 mm | 18" |
Ø 400 mm | 15.7" | - | Ø 500 mm | 19.7" |
Ø 457 mm | 18" | - | Ø 700 mm | 27.6" |
Ø 500 mm | 19.7" | - | - |
Ø 600 mm | 23.6" | - | - |
Ø 700 mm | 27.6" | - | - |